Sea Spray Vinyl Flooring 5763

Overview

• Barefoot/ shod safety product without the need for studs
• 50+ on the Pendulum (Slider 96), DIN 51097 Class B, R11
• 12 Shades, 6 chipped, 6 unchipped
• PUR
• Designed for use in commercial & residential settings (Use area 23/34/43)
• A+ BRE generic rating, 100% recyclable & low VOC emissions

Downloadable Assets

• BoQ Specification
• Comprehensive Specification

BoQ Specification

Supply and install 2.00mm x 2.00m Polyflor Polysafe Quattro PUR flexible PVC sheet flooring in 2.0mm thickness containing a selection of the following safety aggregates to impart enhanced slip resistance: coloured quartz, natural recycled aggregates and aluminium oxide granules and installed with Polyflor recommended adhesive which has been spread using an A2 notched trowel on a previously prepared Class 1 subfloor in accordance with SANS 10070, using a Polyflor recommended self-leveller and moisture barrier when required, including all cutting and waste, rolling the installed sheeting in both directions with a 68kg three-sectional roller immediately after it has been laid into the adhesive, joints must be butted, U-shape grooved and heat welded using Polyflor’s matching welding rod ensuring that the welding rod bonds to more than 2/3rds of the sheet in thickness, available from Polyflor (011) 609 3500.

• Colour: Sea Spray
• Code: 5763
• Weld Rod: 5202

Technical Product Compliance

• Barefoot/ shod safety product without the need for studs
• 50+ on the Pendulum (Slider 96)
• R11
• 12 Shades, 6 chipped, 6 unchipped
• 2mm gauge
• PUR
• Designed for use in commercial & residential settings (Use area 23/34/43)
• A+ BRE generic rating, 100% recyclable & low VOC emissions
• P4

Comprehensive Specification

Supply and install Polysafe Quattro PUR flexible PVC sheet flooring in 2.0mm thickness containing a selection of the following safety aggregates to impart enhanced slip resistance: coloured quartz, natural recycled aggregates and aluminium oxide granules, the flooring material shall fully conform with the European Norm for safety flooring – EN 13845, in respect of flame spread, the flooring shall be categorised as Class Bfl-S1 according to EN 13501-1. The flooring shall have been fully tested to ASTM E648 by an independent test house and have a Class 1 rating, making it suitable for use in institutional, commercial and public buildings, the flooring must have been fully tested by an independent test house to the RRL Pendulum Test (Slider 96) and have results of 50+ in the wet, with a surface roughness of Rz ≥20μm, making it suitable for use in areas where enhanced slip resistance is required in barefoot or shod conditions. A result of Class B to AS 4586 Part C & DIN 51097 should be achieved. The product should be certified as R11 to DIN 51130, the flooring shall meet the water tightness requirements in EN 13553, meaning suitability for installation in special wet areas, the product must have been fully tested for abrasion resistance to EN 13845, passing the 50,000 cycles test and meeting EN 660-2 Abrasion Group T, this product should not accumulate static charges above 2kV and is classified as ‘antistatic’ when tested to EN 1815. For specialist applications where there is a requirement to dissipate the electrostatic charge, see the Polyflor ESD product ranges, the flooring must be available in 2.0 metre width, to minimise the number of joints, the flooring must be suitable for Use Area Classification 23/34/43, as defined in EN ISO 10874 (EN 685), In respect of light fastness, the flooring shall have been fully tested to ISO 105-B02 Method 3 and obtain ≥6.

• Colour: Sea Spray
• Code: 5763
• Weld Rod: 5202