Studio Grey Vinyl Flooring 9933

Studio Grey Vinyl Flooring from the Bloc PUR range enables you to create a tonal, complementary or harmonious interior design scheme. The Bloc PUR range is available in 16 enticing colours.

Description

Overview

As with all Heterogeneous PUR ranges, Bloc PUR features a high quality, cross-linked polyurethane reinforcement, UV cured to provide a low-cost polish free maintenance regime for the lifetime of the flooring.

As with any plain material, the soil hiding properties are less than similarly coloured patterned floors. Higher frequency of maintenance may be required to ensure optimum appearance.

Careful consideration should also be given when choosing very light colours in highly trafficked areas.

Polyflor Heterogeneous PUR ranges demonstrate outstanding durability and abrasion resistance. The Binder Content shall beType I as defined in EN ISO 10582.

Bloc PUR achieves a BRE Global A+ rating (Generic).

Bloc PUR is 100% recyclable and contains 10% recycled material.

Ideally suited for heavy traffic areas, Bloc PUR is recommended for use throughout retail outlets, leisure and commercial facilities.

Architectural BOQ Specification

Supply and install Bloc PUR single solid colour with a textured emboss, flexible PVC sheet flooring in 2.00mm thickness, shall have the following laminated construction: 0.7mm pigmented homogeneous PVC wear layer, with a 1.30mm PVC backing featuring a pimple emboss, shall incorporate a specially formulated polyurethane reinforcement, in accordance with EN ISO 10582/EN 649 and installed with a Polyflor recommended adhesive which has been spread using an A2 notched trowel on a previously prepared Class 1 subfloor in accordance with SANS 10070, using a Polyflor recommended self-leveller and moisture barrier when required, including all site formed skirtings(to architect’s specifications) installed with PC20 Cove Former and CS48 Capping Strip, including cutting and waste, rolling the installed sheeting in both directions with a 68kg three-sectional roller immediately after it has been laid into the adhesive, joints must be butted, U-shape grooved and heat welded using Polyflor’s matching welding rod ensuring that the welding rod bonds to more than 2/3rds of the sheet in thickness, available from Polyflor (011) 609 3500.

  • Colour: Studio Grey
  • Code: 9942
  • Weld Rod: 9942

Technical Product Compliance

  • Full conformance with the requirements of EN 649/EN ISO 10582
  • Flexible pvc sheet flooring in 2mm thickness
  • 0.7mm fully pigmented homogeneous PVC wear layer of pure colour
  • Use area classification 23/34/43 as defined in EN 685/EN ISO 10874
  • Fully tested to EN 13501-1 in respect of flamespread
  • For slip resistance, classified DS to EN 13893
  • Binder Content shall be Type I as defined in EN ISO10582
  • BRE Global A+ rating (Generic)
  • Tested to international standards for low VOC emissions

Comprehensive Architectural Specification

Supply and install Bloc PUR single solid colour with a textured emboss, flexible PVC sheet flooring in 2.00mm thickness, shall have the following laminated construction: 0.7mm pigmented homogeneous PVC wear layer, with a 1.30mm PVC backing featuring a pimple emboss, shall incorporate a specially formulated polyurethane reinforcement, as with any plain material, the soil hiding properties are less than similarly coloured patterned floors, the frequency of a regular and well planned maintenance regime should be considered at the outset to ensure the plain floorcovering retains the optimum appearance, careful consideration should be given when choosing very light colours in highly trafficked areas, the use of a robust and effective dirt barrier system should be considered early in the specification chain, in accordance with EN ISO 10582/EN 649, the in-use classification must be at least 23/34/43 as described in EN ISO 10874: i.e. domestic areas with intense use; commercial areas with very heavy traffic; and heavy light industrial areas, in respect of flame spread, the flooring shall have been fully tested to EN13501-1 and certified as having Class Bfl-S1, the Binder Content shall be Type I as defined in EN ISO 10582, this product does not accumulate static charges above 2kV and is classified as ‘antistatic’ when tested to EN1815. For specialist applications where there is a requirement to dissipate the electrostatic charge see the Polyflor ESD product ranges, with regards the European requirement EN 13893 for slip resistance, the flooring shall be classified DS, making it suitable for use in areas which are predominantly dry. When tested to DIN 51130 the product shall be classified as R10. For safety flooring with sustainable wet slip resistance, refer to the Polysafe ranges, in respect of light fastness, the flooring shall have been fully tested to ISO 105-BO2 Method 3 as having a pass to ≥6, the flooring must be available in 2.01 metre width, including a 0.01 metre selvage for on-site trimming, to minimise the number of joints.

  • Colour: Studio Grey
  • Code: 9942
  • Weld Rod: 9942

Do you have questions about vinyl flooring?

CONTACT US