Breccia Vinyl Flooring 4204

Breccia Vinyl Flooring from the Polysafe Apex range is a safety vinyl flooring range combining the assurance of sustainable wet slip resistance with high durability for years of performance in extreme, heavy footfall commercial areas. Available with enhanced slip resistance, the range features a concentrated level of safety aggregates in the vinyl to ensure underfoot safety. Provides low slip potential in busy commercial kitchens and food processing areas where oil and grease are regular contaminants.

Description

Overview

High performance safety floor offering underfoot protection in commercial kitchen and food processing areas.

Enhanced levels of quartz crystals, aluminium oxide and silicon carbide particles incorporated in vinyl to improve traction and safety underfoot.

Sustainable wet slip resistance assured throughout the guaranteed life of the product.

Polysafe Apex fully conforms with HSE & UK Slip Group Guidelines and is classed as an ESf product.

Polysafe Apex is 100% recyclable through the Recofloor scheme and contains recycled material.

Ideally suited for heavy traffic areas with risks of oil, margarine or grease contaminants.

BoQ Specification

Supply and install 2.00mm x 2.00m Polyflor Polysafe Apex Group T flexible heavy duty safety flooring incorporating quartz, aluminium oxide, silicon carbide particles and recycled natural aggregates to improve traction and safety underfoot to impart enhanced slip resistance, the flooring shall feature a high quality, cross-linked polyurethane reinforcement to provide superior cleaning benefits and installed with Polyflor recommended adhesive which has been spread using an A2 notched trowel on a previously prepared Class 1 subfloor in accordance with SANS 10070, using a Polyflor recommended self-leveller and moisture barrier when required, including all cutting and waste, rolling the installed sheeting in both directions with a 68kg three-sectional roller immediately after it has been laid into the adhesive, joints must be butted, U-shape grooved and heat welded using Polyflor’s matching welding rod ensuring that the welding rod bonds to more than 2/3rds of the sheet in thickness, available from Polyflor (011) 609 3500.

  • Colour: Breccia
  • Code: 4204
  • Weld Rod: 4670

Technical Product Compliance

  • Full conformance with the requirements of European Safety Flooring Norm EN 13845
  • Flexible particle enhanced pvc sheet in 2.5mm thickness
  • Use area classification 23/34/43 as defined in EN 685/EN ISO 10874
  • Fully tested to EN 13501-1 in respect of flamespread
  • Fully HSE compliant – achieving 45+ on the RRL Pendulum wet test
  • Surface roughness Rz 70µm + for use in heavy-duty and intense footfall areas where risk of high viscosity contamination such as oil, grease and margarine are present
  • R12 rated product
  • Achieves 50,000 cycles abrasion test to EN 13845
  • BRE Global Generic A+ rating in major use areas such as education and healthcare
  • Tested to international standards for low VOC emissions

Comprehensive Specification

Supply and install 2.50mm thick x 2.00m wide Polysafe Apex Group T flexible heavy duty safety flooring Incorporating quartz, aluminium oxide, silicon carbide particles and recycled natural aggregates to improve traction and safety underfoot, for optimum appearance retention and life cycle maintenance cost savings of up to 60%, obtains a R12/ ≥36 (Pendulum wet test – 4S Rubber/Slider 96),conforms to EN 13845 50,000 cycles abrasion test, manufactured in accordance with EN 649/ISO 10581 and laid in Polyflor approved acrylic adhesive which has been spread using an A2 notched trowel on a previously prepared Class 1 sub-floor with a 50mm below surface drilled moisture content reading of 75% RH in accordance with SANS 10070, using Polyflor approved self-levelling screed when required, including all cutting and waste, rolled in both directions with an articulated 68kg three-sectional roller immediately after it has been laid into the adhesive, joins must be butted, U-shape grooved 2/3rds thickness of the sheet and heat welded using the manufacturer’s welding rod, maintenance according to the manufacturers PUR maintenance programme.

  • Colour: Breccia
  • Code: 4204
  • Weld Rod: 4670

Do you have questions about vinyl flooring?

CONTACT US